The water-based acrylic industrial emulsion KL-3050, developed by KANGLY Chemical Industrial Co., Ltd., takes high gloss and strong adhesion as its core breakthroughs, while also offering excellent water resistance and salt-water resistance.
Through the synergistic effect of molecular chain design and film-forming aids, the product can form a dense paint film on the surfaces of substrates such as steel structures and color steel tiles, effectively solving the problems of traditional coatings such as easy peeling and rust recurrence. It provides a more stable waterborne solution for industrial coating.

Product Introduction
KL-3050 is a silicone-modified acrylic emulsion developed by KANGLY Chemical specifically for waterborne industrial coatings. This product offers excellent early water resistance and long-term sealing performance, along with good encapsulation of powders and high thickening efficiency, making it highly suitable for formulating various waterborne industrial coatings.
Technical Specifications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Characteristics
-
Excellent water resistance and weather resistance
Strong water and weather resistance, UV and hydrolysis resistance, suitable for outdoor anti-corrosion applications. -
Excellent powder encapsulation
Strong powder encapsulation, uniform dispersion, high adhesion, stabilizes powder and prevents sedimentation. -
High paint formulation adaptability
Strong compatibility in paint formulation, compatible with various additives, and good stability.
Product Applications
Metal anti-rust topcoat, waterborne acrylic floor coating.
After KL-3050 waterborne acrylic emulsion is prepared into an industrial coating according to the established formulation system, the following tests were conducted:
Adhesion Test
According to GB/T 9286-2021 (cross-cut method), the adhesion grade of the cured paint film was evaluated.
√ Test result: The cut edges were completely smooth, with no detachment within the grid; the adhesion grade was 0.
Gloss Test
A gloss meter was used to test the surface of the cured paint film.
√ Test result: The gloss of the KL-3050 waterborne acrylic emulsion-based industrial coating film reached 88%, demonstrating the advantage of high gloss on metal substrates.
Hardness Test
According to GB/T 6739-2022 (pencil hardness method), Zhonghua 101 drawing pencils were used; the hardness performance of the cured film of KL-3050 waterborne acrylic emulsion-based industrial coating was characterized.
√ Test result: The film hardness grade was B (scratch critical hardness value). This hardness level indicates that the film maintains moderate surface hardness while also having good deformation buffering capacity, which can effectively reduce the risk of brittle cracking of the film caused by slight substrate deformation.
Water Resistance Test
According to GB/T 1733-1993, method for determining water resistance of paint films (immersion method), the KL-3050 waterborne acrylic emulsion-based industrial coating was prepared and cured by the standard process, then continuously immersed in a 23°C constant-temperature water bath for 240 hours.
√ Test result: No blistering, peeling, or other phenomena on the test panel film surface; slight surface discoloration. It can meet the long-term anti-rust and weather-resistant protection requirements for outdoor steel structures such as factory steel structures and stadium domes.
Salt Water Resistance Test
According to GB/T 9274-1988, the KL-3050 waterborne acrylic industrial coating was prepared according to the formula and continuously immersed in 3% NaCl solution for 168 hours.
√ Test result: No blistering or rusting on the test panel film surface; slight surface discoloration. This confirms that the film can still effectively block chloride ion penetration in a saltwater immersion environment.








