In the printing field, as requirements for waterborne coating performance—especially for high-gloss applications—continue to rise, single-component waterborne acrylic emulsion systems often have limitations in balancing key properties when meeting high-end demands.
To address this, Kangly Chemical has developed a high-performance emulsion combination with complementary characteristics: LA-6098 high-gloss film-forming emulsion and LA-6099 high-gloss hard non-film-forming emulsion. Through scientific compounding technology, the two work synergistically to effectively overcome the performance limitations of single systems and significantly enhance the overall performance of printed products. This combination solution excels in both high gloss and excellent adhesion.

Product Characteristics
-
Gloss
This product delivers stable high-gloss performance (gloss 80°–85°), meeting the high-gloss requirements of high-end packaging, labels, and other fields. -
Abrasion resistance
Excellent abrasion resistance and strong resistance to scratching and wear, protecting surface integrity. -
Anti-blocking property
Good anti-blocking performance, effectively preventing printed products from blocking or ink transfer during stacking or under temperature/humidity changes, keeping surfaces clean. -
Color development
Excellent color development, high color reproduction, and full, rich colors in printed patterns. -
Drying speed
Reasonable drying time, ensuring full film formation and stable performance while meeting production efficiency requirements.
Product Applications
Suitable for formulating waterborne high-gloss varnishes, waterborne aluminum foil varnishes, waterborne clearcoats, waterborne flexographic and gravure waterborne inks, waterborne decorative paper inks, etc.
After the Test Mix 6098-6099 emulsion was formulated into waterborne varnish and waterborne ink according to the established formula, the following tests were conducted:
Gloss Test of Waterborne Varnish & Waterborne Ink
Abrasion Resistance Test
A standard abrasion tester was used to perform 1,000 reciprocating friction cycles on the surface of cardstock specimens coated with 6098-6099 varnish.
√ Test result: After the test, no obvious color transfer (staining) was detected on the surface of the friction medium. Observation showed no visible scratches or wear marks on the varnish coating surface of the specimens.
Anti-Slip Performance Test
Cardstock specimens coated with 6098-6099 varnish were fixed on an adjustable-angle platform, and a standard slider was placed on the specimen surface. The platform inclination angle was increased at a constant rate until the slider began to slide, and an inclinometer was used to record the inclination angle at the instant of initial sliding.
√ Test result: The maximum static friction angle of the varnish coating surface was measured as 32°. This data indicates that the coating has excellent surface anti-slip performance.
Color Development Test
√ Test result: Compared with ordinary high-gloss emulsions (inks), 6098-6099 ink exhibits excellent color development.
Adhesion Test
6098-6099 ink and ordinary high-gloss emulsion (ink) were blade-coated onto cardstock, and their performance was tested using 3M 610 tape.
√ Test result: Both 6098-6099 ink and ordinary high-gloss emulsion (ink) showed excellent results.
LA-6098 and LA-6099 are acrylic emulsions suitable for waterborne high-gloss varnishes and inks. They offer excellent gloss and transparency as well as outstanding adhesion, making them preferred choices for your ink and varnish raw material applications.








